Wednesday, August 21, 2013

Invitation card - free download

"Innbydelse" means invitation and this is the card I created together with my kid turning 5. All was created in Inkscape and cutted/plotted using my Silhouette SD. For the text I used the text along path function. I used the italic version of the Enter Sansman font which I found very similar to the Goodyear font. For the letters B and D I splitted the letters using a bar to keep the inner parts in place after cutting. I used a white ring of printer paper to get the letters white. The text and the white ring are not included in the .svg/.dxf as I guess you will change the text and the ring is very simple to create.

The racing car is one of my boy's drawings that I scanned and manually vectorized using Inkscape. I also made him write his name and vectorized this. For the text inside the card I used the CamBam Stick font number 8.


Tuesday, July 30, 2013

Boxes for logistics at home

My husband had this great idea that we should purchase six boxes: one for each member of the family and one for the top floor and one for the basement. The purpose is to transport all mess to its proper place or adressing it to the rightful sinner.
We found the perfect boxes for this at IKEA. These plastic boxes have the optimal surface for attaching vinyl to it, they can be stacked if needed and the size is large enough to take a reasonable amount of mess. To see the name on the box from the side and from above I have attached the vinyl text both inside and outside.

A great idea tend to die when meeting real life, but I'd say this have been working quite as intended. I plan to give the boxes a base camp like small shelves to rest on when getting filled. Lack shelves from IKEA with concealed mounting, I guess...

The font I used is the Zephyr Script. I found this font through cleversomeday's blogpost on fonts for diecutters.

Monday, July 15, 2013

Single line fonts - the options

A large amount of digital fonts is available for free on the web. One challenge with these fonts using a plotter is that the standard font formats (True Type .ttf and Open Type .otf) are defined by its outline. These outline paths are closed paths and the format require closed paths. When I use my plotter for writing text I will typically prefer to draw the centerline (single line) not the outline. The centerline is typically an open path and are therefore not accepted by the ttf/otf format.
Here I have tried to list the options that I have found on the web when trying to overcome this problem.

Single line, open path fonts with a temporary closing

To make an open path, single line font available in the .ttf/.otf the paths can be closed temporarely. Then the paths just need to be opened before plotted. 

CutTwoPieces.com have written a series on the topic single line fonts. She links to Rhinoceros where these fonts can be downloaded (go to paragraph #2). This image from Cut Two Pieces also demonstrate the difference between the temporary closed paths (before) and the open paths (after).


The opening of the path can be done in Inkscape with a simple extension. I wrote the unclosePath extension and later discovered that a closeoff_v47 extension already existed sligtly different. I have written a simple tutorial for this. From the same site with the closeoff extension there is a single line closed font available, the SD Stroke.
SD Stroke avilable from lolipop.jp

I also found one such font at McNeel Wiki. This MecSoft font-1 is shown below.
Temporary closed font from McNeel Wiki
I have also a tutorial on how to make your own single line fonts and you can download one of mine single line fonts.

The developers of Make-the-Cut software has come up with the workaround for open path fonts. For the temporary closed single line font of .ttf format, the extension could be changed to .opf (Open Path Font). The MTC software recognize these fonts by their extension and knows not to close the paths when rendered.

I do not have the MTC software, but this is how I am able to use these fonts using Inkscape:


  • Change the extension (.opf) back to .ttf and install the font
  • Use the Inkscape-extension described above to re-open the paths.
Lettering Delights have a lot of these .opf fonts available. Beautiful fonts, but not for free. Under a Cherry Tree have an inspiring post on how to use these fonts with th MTC software. With the Inkscape extensions described above I can do the same with my Silhouette Studio in combination with Inkscape. Onelinefonts.com also have a few .opf fonts available. Neither these are for free. The letters a-d can be downloaded for trial before purchase to see that it is working with your software.

Hershey fonts

Hershey fonts are a collection of vector fonts developed by Dr. A.V. Hershey in the 60's. The fonts are free to use, but the font format is not accepted by most softwares. You can use the fonts in Inkscape through this extension. Only two 1-stroke (single line) fonts are available.


Stick fonts

The stick fonts are fonts having an overlapping outline and thus look like single line. The plotter will draw all glyphs twice (forth and back). This will take more time and might cause the pens to last shorter(?) If these fonts should be used with rhinestones the glyphs will have to be manually edited to make the path single. Cut Two Pieces show in a video how she solves this. I'm thinking about writing an Inkscape extension for this to automate that process.

A set of 9 fonts called CamBam Stick Fonts are available for free. The image below show the three fonts from this set that I like (i.e. the script fonts).
The CamBam Stick Fonts #5,6 and 8.
Searching for hairline, handwritten or single line fonts on webpages like dafont.com or 1001freefonts.com might give you fonts that could work pretty well for gel pens. Cleversomeday have tested some of these fonts here.

Single line alphas

Alphas are single character graphics (in this case vector graphics). To create text these has to be combined glyph by glyph graphically not by typing text from your keyboard like for a font. I have a tutorial on how to convert these alphas to a font. 

Here is an alpha from Paper Pulse. She has used the RapidResizer to convert from raster to vector graphics. This online tool is able to search the centerline instead of the outline. This is a function that is missing in Inkscape.

An alpha from paper Pulse.

Tuesday, July 9, 2013

How I create my own single (or double) line font

This post has been upgraded in another post. The method is now much better :)

How to use temporary closed single line fonts

Single line fonts that are true single lined, but in the format of .ttf or .otf need to be closed paths to fullfill the requirements for the file format. True single line fonts are open paths. So if we have temporarely closed a single line font this may be unclosed using my reopenSingleLineFont-extension. To install the extension copy the .py and .inx to the \Inkscape\share\extension folder. You need to restart Inkscape.

How the text to path is rendered is a bit different among the versions of Inkscape. For the last version 0.91 and mac the last node (if straight line) should be removed. For Windows and the older v0.48 only z's should be removed.

Here I have written something with my closed single line font.

To see the paths I turn the stroke on and the filling off.

Then I convert the text to path (Path->Object to Path) and ungroup the text-paths.

Next I use the reopenSingleLineFont from the Extensions->Typography menu (Re-open single line font). And my font is no longer text, but at least it looks and works as I want to :)

Read more on creating fonts.